Beagleboard.org is in the process of releasing a new revision of the BeagleBone Black, Its Rev C. The changes for Rev C include upgraded 4 GB eMMC from 2 GB eMMC and will ship with a Debian distribution as opposed to the current Angstrom distribution.
Debian has a larger base of community support, and more hobbyists are familiar with this particular distribution. We hope this software change gives our customers a better user experience with the BeagleBone Black.
In addition to the upgraded memory and improved software, The price will be increased compared to the previous version selling price.
Stay tuned for more updates on new products and happenings at Sanatana Techtronics. Let us know if we can provide you with more information. Feel free to contact us @ firstname.lastname@example.org for any support and sales queries.
Beaglebone black is a candour single board computer; a processor, memory, and graphics acceleration are all shrunken down as chips to a single circuit board. It has been equipped with a good feature to allow the user to experience the power of the board, Interestingly magnitude of expansion headers with two 48-sockets, includes a number of analog I/O pins that allow it to connect to a variety of sensor hardware also creating opportunities to add many features and interfaces via add-on boards or Capes. Capes are available for, VGA, LCD, motor control, prototyping, battery power and other functionality. The features of the board is explained down the topic. Lets unbox and see what it has,,,
Wow! here are some unboxing pictures taken, The board is shipped along with the USB cable.
board features highlighted:
The board is featured with 1GHz processor, 512MB on-board DDR3 RAM, built in 2GB storage with pre-installed Linux operating system, MicroHDMI connector etc…
Sitara AM335x ARM cortex – A8 processor: The board is based on the Sitara AM335x ARM Cortex-A8 processor from Texas Instruments Incorporated (TI), It provides 1-GHz performance – 150 percent higher performance than ARM11 for more advanced user interfaces and computation power.
DC power: +5V DC power can be supplied to the BeagleBone through a barrel connector or from the mini-USB, both of which are located near the large RJ45 Ethernet connector.
2 GB on-board storage using eMMC: In addition to all the features of the previous board (Beaglebone), the Beaglebone black now uses embedded nonvolatile memory system using eMMC , which frees the MicroSD slot to be used for additional storage. Here, Its preloaded with Angstrom Linux distribution image.
512MB DDR3: The board is having 512 megabytes of low-power DDR3L RAM, doubling the size and speed of the volatile memory and ensuring it will execute software faster.
PMIC: The board uses a TI TPS65217B PMIC to generate stable supply voltages regardless of input power variation.
Power button: The board provides a push button near the Ethernet connector for powering off and powering on the board. There exists a mutual functioning between the processor, PMIC and the power button for the proper shutdown when the power button is pressed.
Reset button: When pressed and released, causes a reset of the board.
Boot button: Boot button is used to boot the Beaglebone black directly from an external microSD card. You can boot the Beaglebone Black from an external SD card by holding down the BOOT button when applying the power
HDMI framer: The BeagleBone Black has an on-board HDMI framer that converts the LCD signals and audio signals to drive an HDMI monitor. The design uses an NXP TDA199988 HDMIFramer.
Micro HDMI: with this microHDMI we can connect directly to monitors and TVs.
USB host: USB 2.0 type A host port.
10/100 Ethernet: 10/100 Ethernet RJ45 socket, IPv4 and IPv6 networking.
MicroSD slot: MicroSD slot for additional user data or operating systems.
Serial Debug: Serial debug is provided via UART0 on the processor via a single 1×6 pin header. In order to use the interface a USB to TTL adapter will be required.
Expansion headers: The expansion interface on the board is comprised of two 46 pin connectors. All signals on the expansion headers are 3.3v unless otherwise indicated.
Supporters for the board:
1. Beagle Armour: Transparent acrylic enclosure case box for Beaglebone with GPIO access hatched for prototyping.
2. Getting Started with Beaglebone black: This Getting started book written by Matt Richardson intended for beginners certainly includes an introduction to both programming and physical demonstrationsof this powerful development board.
3. Kits and accessories for Beaglebone: The kit includes all the necessary accessories to kick start with the Board
Beaglebone book for the beginners
Stay tuned for more updates on new products and happenings at Sanatana Techtronics.Let us know if we can provide you with more information. Feel free to contact us @ email@example.com for any support and sales queries.
We are happy to announce Sanatana Techtronics now a distributor of beagleboard.org products in India. The ‘beagleboard.org’ distribution has opened a door for us to bring more of our vision to reality.
Beagleboard.org has shaped a number of open source products from the initial ‘Beagleboard’ to the recent launch of the ‘Beaglebone-black’, bringing high performance ARM-based processing technology to a wide community of developers and users in a very economical approach to the users.
The Beagles are open source boards with full-size functionality in small bodies, can be used for all kinds of applications you’ve been tinkering with.
Click the below link for the list of products by manufactures.
The Cortex-M3′s Blueboard LPC1343 is a board featuring a high level of integration in terms of both performance and power usage, and also the price to afford them.
With us the Cortex-M3 exists in two flavors as stamp board and the blueboard for the two end users; the stamp board has an on-board USB JTAG Debugger which makes you don’t need to buy another JTAG Emulator and all the GPIOs are extended for developmental applications. Blueboard is the one which is ideally suitable for training, hobbyist and for developmental purposes where you get all the necessary hardware’s in a single board to test the functionality that ease your learning curve and speed up your program development.
In addition, the software examples accompanied with the kit will be convenient for you to evaluate the functions of the NXP LPC1343 processor and ease your development.
Here is an Application Note helps you getting started with LPC1343
Comprehensive list of economical ARM boards can be found in our previous blog post. By way of comparison, here’s a table of the fast moving boards with the specification based on an ARM microcontroller. These boards are available for purchase in a single unit quantity.
Feel free to leave a comment containing the corrections, for more information about the boards contact us at firstname.lastname@example.org.
One stop solution for the ARM microcontroller based boards aiming to offer the development platform with efficacy and reducing the risk taking factor in testing and evaluating the functionality.We support for a series of ARM controllers start with ARM7, Cortex M0, Cortex M3 and Cortex M4 . For more information about each family, please click the product catalog link below.
Sanatana Techtronics is now an official distributor for NGX Technologies products in India.
NGX Technologies is a leading supplier of development boards for the ARM7, ARM Cortex-M0, M3 and M4 series of microcontrollers. NGX provides groundbreaking designs for embedded systems with innovative and cost effective solutions.
For more information take a tour on products from NGX Technologies.